Seamless Stainless Steel Tubing-manufacture,factory,supplier from China

Stainless Steel Square Tubing meets and exceeds the industry's stringent specifications, so you can be sure you're receiving the highest quality square tubing available today. Stainless steel square tubing is corrosion resistant, provides additional mechanical properties when needed, and allows for an upgraded stainless steel architectural appearance.Stainless steel square pipes are a type of stainless steel tubing that has a square cross-section. They are commonly used in various industries due to their strength, durability, and resistance to corrosion.

Hot Rolled Seamless Tubing (HRST) is a type of seamless steel pipe produced through a hot rolling process, typically manufactured using Mannesmann technology.

Colored Stainless Steel Tubes not only maintain the physical, chemical, and mechanical properties of primary stainless steel, but also have stronger corrosion resistance than primary stainless steelIndustry-Specific AttributesTypeWelded&SeamlessSteel Grade200 Series 300 Series,304N,310S,316Ti,316L,316,347,304Tolerance±1%Grade300 SeriesSteel Grade301,310S,410,316L,304Surface Finish2B/8K/Mirror/No.1,etcInvoicingby theoreticalweightOther AttributesStandardASTM JIS GB DINENPlace of OriginShandong,ChinaSection ShapeRoundAlloy OrNotIs AlloyDelivery Time8-14 daysBrand NameXINTUOYUANModel Number20

Product description:Stainless steel precision pipes, also known as stainless steel precision tubes, are specialized seamless tubes designed to meet precise dimensional and surface finish requirements, particularly in industries where corrosion resistance, hygiene, and high purity are essential. Here are some key features and characteristics of stainless steel precision pipes:1.Corrosion Resistance: Stainless steel precision pipes are made from corrosion-resistant stainless steel grades, such as 304, 316, 316L, and 321.

Hot Finished Seamless Tubing is a major category of seamless steel pipes, classified according to production methods.

The maximum carbon content of Stainless 316 Steel Tube 36mm diameter is 0.03, which can be used in applications where annealing is not possible after welding and maximum corrosion resistance is required.Key attributesIndustry-specificattributesTypeWeldedSteel Grade310S,316Ti,316L,316,304,304LTolerance±1%Grade300 SeriesSteel Grade301L,301,304N,310S,410,316L,316,410S,314,309S,304L,305Surface Finish2BInvoicingby actual weightOther attributesStandardASTMPlace of OriginShandong,ChinaSection ShapeRoundAlloy Or NotNon-AlloyDelivery Time15-21 daysBrand NameKehuanModel Number300 SeriesApplicationIndust

Cold Drawn Steel Tubing is a kind of high-precision steel pipe material processed by cold drawing or hot rolling. Due to the advantages of no oxide layer on the inner and outer walls of the precision steel tube, no leakage under high pressure, high precision, high finish, no deformation in cold bending, no flaring, no cracks in flattening, etc., it is mainly used to produce products for pneumatic or hydraulic components, such as cylinders or The oil cylinder can be a seamless pipe or a welded pipe.Product Name Carbon Steel PipeMaterialA53(A.B)A106 (A. B).0345,16Mn, 10#, 20#,45# S235JR.

Cold Drawn Stainless Steel Tube is a stainless steel tube processed through cold drawing technology, which has excellent corrosion resistance, high temperature resistance, and high strength, and is widely used in multiple industries Due to the advantages of no oxide layer on the inner and outer walls of the precision steel tube, no leakage under high pressure, high precision, high finish, no deformation in cold bending, no flaring, no cracks in flattening, etc., it is mainly used to produce products for pneumatic or hydraulic components, such as cylinders or The oil cylinder can be a seam

PRODUCT NAME: HONED TUBEALSO KNOWN AS PRODUCT NAME: HONED TUBING / CYLINDER TUBE / CYLINDER TUBING /  HONED CYLINDER TUBE / HYDRAULIC CYLINDER TUBING / HONED ID TUBINGHoned tube for hydraulic cylinder is made of our factory’s own cold drawn seamless tube (CDS tube), by honing process or Skiving & Roller Burnishing process. PRODUCT STANDARD:Our honed hydraulic cylinder tube is usually produced according to norms as ASTM A513, DIN 2391, DIN 1630, DIN 1629, EN10305-1, EN 10216-2, A 519, etc on customer’s request.SIZE RANGE:We manufacture honed tubes in metric dimensions and imperial

   Carbon steel seamless steel pipes are made of one piece of metal and have no seams on the surface. According to the production method, seamless pipe is divided into heat pipe, cold rolled pipe, cold drawn pipe, extruded pipe, pipe jacking and so on. Carbon seamless steel pipe is mainly used for petroleum geology drilling pipe, petrochemical cracking pipe, automobile, tractor and aviation boiler pipe, bearing pipe and high-precision structural steel pipe.

Product introduction      Welded steel pipe, also known as welded pipe, is a steel pipe made of steel plate or strip steel after crimping and welding,generally 6 meters.

A106b seamless steel pipes have a wide range of specifications, with outer diameters ranging from 6.0mm to 1200.0mm, wall thicknesses ranging from 1mm to 200mm, and lengths up to 3000mm to 24000mm.

Hot Finished Seamless Steel Tubes are a type of seamless steel pipe produced through a hot rolling process. During the production process of this steel pipe, the steel is heated and rolled through a mold to form the desired shape and size.

Seamless Hot Rolled Steel Tubes is a long strip of steel with a hollow cross-section, widely used for transporting fluids such as oil, natural gas, coal gas, water, and certain solid materials. Compared with solid steel, carbon steel seamless steel pipes are lighter in weight while maintaining the same bending and torsional strength.

    Seamless Steel Pipe has a wide range of applications in building materials, mainly used for supporting and connecting components in various building structures.

Product description:Hot rolled seamless pipes are steel pipes that are formed by rolling a steel billet at high temperatures, typically around 1200 to 1400°C. This process allows the steel to be shaped and formed without seams, resulting in a smooth surface finish. Hot rolled seamless pipes are known for their strength and durability, making them suitable for applications in industries such as oil and gas, construction, and automotive.

Cold drawn seamless steel pipes according to ASTM A210 standard are mainly used for boilers and superheaters, and can work stably in high temperature and high pressure environments.

Oval Seamless Steel Tube is widely used in industries such as construction, machinery manufacturing, shipbuilding, and automotive manufacturingProduct description:Special-shaped seamless steel pipes refer to seamless steel tubes with non-circular cross sections such as square, rectangular, oval and other irregular shapes.

Carbon steel seamless steel pipe is a long strip of steel with a hollow cross-section, widely used for transporting fluids such as oil, natural gas, coal gas, water, and certain solid materials. Compared with solid steel, carbon steel seamless steel pipes are lighter in weight while maintaining the same bending and torsional strength.

Black Carbon Seamless Steel Pipe usually refers to carbon steel seamless steel pipes that have undergone black rust prevention treatment on the surface. This type of pipeline is widely used in various industrial fieldsProduct introduction             Carbon steel seamless steel pipes are made of one piece of metal and have no seams on the surface.

4 Inch Hot Rolled Seamless Steel Pipe is mainly produced through oblique rolling or continuous rolling processes.

ASTM A213 Cold drawn seam steel pipe is suitable for seamless steel pipes used in boilers, superheaters, and heat exchangers.

Carbon Steel Seamless Pipe is a type of elongated steel material. Steel pipes have a hollow cross-section and are widely used as pipelines for transporting fluids, such as oil, natural gas, coal gas, water, and certain solid materials. Compared with solid steel such as round steel, steel pipes have the same bending and torsional strength but are lighter in weight, making them an economical cross-sectional steelProduct introduction        Carbon steel seamless steel pipes are made of one piece of metal and have no seams on the surface.

Hollow Carbon Seamless Steel Pipe is a type of steel pipe made from steel ingots or solid billets through processes such as perforation and stretching.