API 5L-manufacture,factory,supplier from China

API 5L Line Pipe refers to a type of steel pipe that is manufactured according to the specifications outlined in the American Petroleum Institute (API) standard 5L. This standard covers the manufacture of both seamless and welded steel pipes intended for the transportation of oil, gas, and water in pipeline networks.

With the development of API 5L seamless steel pipe technology and the advancement of forming and technology, the application scope of API 5L seamless steel pipe is gradually expanding, especially in API 5L large-diameter seamless steel pipe. The advantages are more obvious. Coupled with the cost factor, API 5L seamless steel pipe has occupied a dominant position in the field of pipeline steel pipes. The development of API 5L seamless steel pipe.

API 3PE 5LSeamless Steel Pipe is widely used in the transportation of gas, water, oil and other media in industries such as petroleum, natural gas, chemical, and power.

Hot Finished Welded Tubesare widely used in various fields due to their simple production process, high production efficiency, wide variety and specifications, and low equipment investment.Hot Finished Welded TubesSize OD 21.3mm~1620mm(round) Thickness 0.5mm-30mm Length 1-12m or as per customer's requirement Surface Hot dipped galvanized, 20g-275g/m2 Standard GB/T13793-1992,GB/T14291-2006, GB/T3091-1993,GB/T3092-1993,GB3640-88 BS1387/1985,ASTM A53/A36,EN39/EN10219,API 5L,GB/T9711.1-99 etc Material Q195-Grade B, SS330, SPC, S1

Carbon steel seamless steel pipe is a long strip of steel with a hollow cross-section, widely used for transporting fluids such as oil, natural gas, coal gas, water, and certain solid materials. Compared with solid steel, carbon steel seamless steel pipes are lighter in weight while maintaining the same bending and torsional strength.

Seamless Carbon Steel Large Diameter Pipe has a hollow cross-section and is widely used as a pipeline for transporting fluids, such as oil, natural gas, coal gas, water, and certain solid materials. Compared with solid steel such as round steel, steel pipes have the same bending and torsional strength but are lighter in weight.

A106b seamless steel pipes have a wide range of specifications, with outer diameters ranging from 6.0mm to 1200.0mm, wall thicknesses ranging from 1mm to 200mm, and lengths up to 3000mm to 24000mm.

Black Carbon Seamless Steel Pipe usually refers to carbon steel seamless steel pipes that have undergone black rust prevention treatment on the surface. This type of pipeline is widely used in various industrial fieldsProduct introduction             Carbon steel seamless steel pipes are made of one piece of metal and have no seams on the surface.

An H-beam, also known as an I-beam or universal beam, is a structural steel shape characterized by a cross-section that resembles the letter "H." It is widely used in construction and engineering applications due to its high strength, rigidity, and efficient use of material. The H-beam's design allows it to support loads primarily through resistance to bending.Here are some key features and characteristics of H-beams:1.Cross-Section: The H-beam has a wide, flat flange on each side of the vertical central section, known as the web.

Carbon Steel Seamless Pipe is a type of elongated steel material. Steel pipes have a hollow cross-section and are widely used as pipelines for transporting fluids, such as oil, natural gas, coal gas, water, and certain solid materials. Compared with solid steel such as round steel, steel pipes have the same bending and torsional strength but are lighter in weight, making them an economical cross-sectional steelProduct introduction        Carbon steel seamless steel pipes are made of one piece of metal and have no seams on the surface.

U-channel is a steel grating component used to manufacture various curved rods or covering devices, typically used in fields such as construction, electronics, packaging, rail transit, and medical equipmentIndustry-specific attributesStandardAiSi ASTM BS DIN JIS ENGradeQ235BShapeC U ChannelTolerance±5%Invoicingby theoretical weightOther attributesPlace of OriginTianjin, ChinaAlloy Or NotNon-AlloyDelivery Time31-45 daysBrand NameTYENModel Number5#-40#Applicationconstruction steel channelPerforated Or NotIs PerforatedProcessing ServiceBending, Welding, Punching, CuttingProduct NameC U type cold

A106 seamless steel pipe is a very important pipeline material, and its excellent performance and wide application fields make it an indispensable material in industries such as petroleum, natural gas, and chemical.Product nameA106 Crbon SteelMaterialA335P5 A335 A36 Q195 Q235 Q345 Q215 10# 20# 45# etc.ShapeRound/Square /RectangularOuter Dia(mm)21.3-165mm/10*10-600*600mm/10*20-800*400mmWall Thickness(mm)0.5-2.5to1.5-5.5/0.4-27mm/0.4-27mmLength5800MM, 6000MM or customizedSurface Treatment1)Black, Pre-galvanized2)oiled, powder coating3)Can Galvanized as your requirementPS:Pre galvanized steel pip

Double concave shaped steel pipes usually have a large moment of inertia and section modulus, thus possessing high bending and torsional resistance, which can reduce structural weight and save steel. Product description:Special-shaped seamless steel pipe refers to seamless steel pipes with non-circular cross-sections, such as square, rectangular, elliptical, and other irregular shapes.

Boiler tube refers to the two ends of the opening and hollow section, the length and the surrounding of the relatively large steel, according to the production method can be divided into seamless steel pipe and welded steel pipe, steel pipe specifications with external size (such as outer diameter or side length) and wall thickness, its size range is very wide, from a small diameter of the capillary until the diameter of several meters of large diameter pipe.

Steel Angle is a long strip of steel with two sides perpendicular to each other, and angle steel has a wide range of applications in the fields of construction and engineering.Industry-specific attributesStandardASTM / AISI / JIS / EN / DINGrade304 304L 316 316L 310s 321TypeEqualTolerance±1%Invoicingby theoretical weightOther attributesPlace of OriginTianjin, ChinaAlloy Or NotNon-AlloyDelivery Timewithin 7 daysBrand NameNorth unitedApplicationEngineering StructureProcessing ServiceBending, Welding, Decoiling, Punching, CuttingProduct nameSteel Angle BarShapeEquilateral Angle BarTechniqueHot Ro

ASTM A53 seamless steel pipes are widely used in the petroleum and natural gas industry for transporting fluids such as oil, natural gas, and water.

A106 Steel Pipe is a commonly used low-alloy steel composed of iron, carbon, and small amounts of sulfur, phosphorus, manganese, and other elements, with good weldability and processabilityProduct nameMaterialA335P5 A335 A36 Q195 Q235 Q345 Q215 10# 20# 45# etc.ShapeRound/Square /RectangularOuter Dia(mm)21.3-165mm/10*10-600*600mm/10*20-800*400mmWall Thickness(mm)0.5-2.5to1.5-5.5/0.4-27mm/0.4-27mmLength5800MM, 6000MM or customizedSurface Treatment1)Black, Pre-galvanized2)oiled, powder coating3)Can Galvanized as your requirementPS:Pre galvanized steel pipe: 60-150g/m2;Hot dipped galvanized steel

  Seamless steel pipe has a wide range of uses. General purpose seamless steel tubes are rolled by ordinary carbon structural steel,low alloy structural steel or alloy structural steel, and have the largest output. They are mainly used as pipes or structural parts for conveying fluids. General purpose seamless steel tubes are rolled by ordinary carbon structural steel, low alloystructural steel or alloy structural steel, and have the largest output. They are mainly used as pipes or structural parts for conveying fluids.

20# Low Carbon Seamless Steel Pipe is widely used in many applications, mainly because it has the following significant advantages:High strength and toughness: 20# mild steel has good strength and toughness, which can withstand greater pressure and impact, and is suitable for demanding structures and piping systems.Good processability: Mild steel material has excellent cutting and welding properties, which makes it easier to process and fabricate, saving time and cost.Corrosion resistance: Although the corrosion resistance of 20# steel pipe is relatively low, its durability in corrosive enviro

     20#Seamless Carbon Steel Large Diameter Pipe Boiler tube refers to the two ends of the opening and hollow section, the length and the surrounding of the relatively large steel, according to the production method can be divided into seamless steel pipe and welded steel pipe, steel pipe specifications with external size (such as outer diameter or side length) and wall thickness, its size range is very wide, from a small diameter of the capillary until the diameter of several meters of large diameter pipe.

        45#Seamless Carbon Steel Large Diameter Pipe        Boiler tube refers to the two ends of the opening and hollow section, the length and the surrounding of the relatively large steel, according to the production method can be divided into seamless steel pipe and welded steel pipe, steel pipe specifications with external size (such as outer diameter or side length) and wall thickness, its size range is very wide, from a small diameter of the capillary until the diameter of several meters of large diameter pipe.

Round Carbon Hot Rolled Steel Pipe is a common type of steel primarily used for direct forming or cold heading.

Carbon Hot Rolled Steel Pipe is a type of steel pipe classified according to production methods, as opposed to cold-rolled seamless steel pipes. Cold rolling is carried out at room temperature, while hot rolling is carried out above the recrystallization temperature. Seamless steel pipes are made by piercing round steel and then processing them, while welded steel pipes are made by welding steel plates togetherThe production process of Carbon Hot Rolled Steel Pipe involves heating the steel billet to an appropriate temperature and then rolling it into shape through rollers.

Hot Rolled Carbon Steel Pipe is a non alloy steel material processed by rolling at high temperaturesHot rolled seamless steel pipe is a kind of steel pipe with high strength and excellent corrosion resistance, which is widely used in all kinds of industrial and construction projects. The product is made by heating the steel billet to a high temperature and then forming the pipe by rolling or extruding, which is completed by cooling and straightening processes.